Call us: 0039 0444 401001
LED light indicators offer ﬂeet operators a signiﬁcant improvement in reliability over the traditional incandescent bulb and an important costs saving, so LED lights are becoming increasingly more popular. Regulation ECE R48 requires that any failure of the Direction Indicator circuit must be informed to the driver either visibly or by the use of an audible signal. For LED indicators there is an ISO standard (ISO 13207-1) that outlines the required method. However there have been issues in the market, particularly with ﬂeets of articulated vehicles. In many cases, the prime movers ﬂasher unit may not be compatible with the ISO 13207-1 signal output on a trailer ﬁtted with LED light units. This can be overcome by the ﬁtting of a compatible electronic ﬂasher unit. The alternative solution is to effectively make the trailer lighting system universal by ﬁtting the LED Light Link unit. This will allow the trailer to be coupled to any vehicle regardless of the type of ﬂasher unit ﬁtted.
i-LS is the intelligent and universal solution to the problem of the failure detection of a LED direction indicator lamp. International regulations requires the Failure Detection of a lamp for vehicles driven on public roads. The flasher warns the driver by increasing the flash rate of the direction indicators lights or by switching off an indicator light on the dashboard (for trailers). i-LS is a universal solution as it allows to detect the failure of both bulb and cluster LED between 1W and 8W. Combined with our specific flasher unit, i-LS allows a reliable detection of LED cluster failure and prevents irregular or spurious signals. i-LS does not produce heat so it can be fitted anywhere, its power consumption is irrelevant.
Autoelettric has obtained the European Patent no. 12 004 889.7 for i-LS. i-LS adopts the standard protocol for monitoring the operation of LED lights, ISO "PROTECTED-1: 2012 - Road vehicles - LED lamp characteristics for bulb compatible failure detection". The protocol has been defined by the best car and truck manufacturers to ensure compatibility with the electronic control unit for motor vehicles (Body Control Module).
Autoelettric and Autotec Europe will exhibit in the next Automechanika Shanghai 2019 (China).
Tuesday, 03.12.19 – Friday, 06.12.19
Hall 4.1 - Stand C06
Autoelettric and Autotec Europe were exhibiting at the Automechanika Frankfurt 2018 (Germany).
Thusday, 11.09.18 – Saturday, 15.09.18
Hall 4.1 - Stand C30
Autoelettric was exhibiting at the Automechanika Shanghai 2017 (China).
Wednesday, 29.11.17 – Monday, 02.12.17
Hall 4.1 - Stand C06
Autoelettric was exhibiting at the IAA Hannover 2016 (Germany).
Thursday, 22.09.16 – Thursday, 29.09.16
Hall 24 - Stand A23
Autoelettric was exhibiting at the Automechanika Shanghai 2016 (China).
Wednesday, 30.11.16 – Monday, 03.12.16
Hall 4.1 - Stand C48