Phone number
+39 0444 401001
Phone number
+39 0444 401001
Operation:
The BS-D-N-160-A1 is a high-capacity mechanical switch with built-in vibration sensing that can be used in situations
where there are 2 batteries, such as in trucks, caravans and motorhomes. The BS-D-N-160-A1 can detect whether a
vehicle is running based on the measured vibrations. The BS-D-N-160-A1 and can work in three different ways. A purely
voltage-dependent control can be selected. Another option is to select a system that reacts to the vibrations of the
vehicle it is in. You can also select a combination of both systems. If the voltage is less than 11.8 V for 4 seconds, less
than 12.8 V for 60 seconds, or less than 16.0 V for 0.5 seconds, the relay will turn off. If the relay is turned off, it will only
turn back on if it is below 15.8V for 5 seconds or above 13.2V for 7 seconds. Regardless of where the BS-D-N-160-A1 has
been configured, the BS-D-N-160-A1 will always shut down if the voltage is below 11.6V or above 17.0V for a short time.
The BS-D-N-160-A1 will be reset again if the voltage is within the range of 11.8 and 16.8 V for 5 seconds.
Typical Aplication: Battery separator for two sets of battery, with gastinght contacts
Idela for: Marine, RV , Automotive , Euro 5/6, Truck
Homologation: 10R05
BS-D-N-160-A1
COIL DATA
Operate Voltage: Automatic Detection 12V / 24V
CONTACTS DATA
Rated Current On The Contacts: 160A
Max Switching Current: 420A @ 250ms
OTHER DATA
Connect Voltage: >11,8V @ 12V / >23,6V @24V
Disconnect Voltage: <11,6V @ 12V / <23,2V @ 24V
Stanby Current: ±1,8mA @ 12V / ±2,0mA @ 24V
Vibration Detects: Yes
ADDITIONAL DATA
In Conformity with: 10R05
WEIGHT
Single Net Weight: 0,47 Kg
